Handsender Motorline Falk RCM Mit 4 Kanalen Op 433MHz

Multifrequency auto-scan remote control. ) Technical details: Frequency: 433,92 MHz Code type: ROLLING CODE nicht in deutscher Sprache). Press the CMD button for 1 second. Copying/cloning of the code/protocol from the original remote control. Handsender mit Empfänger - FALK + MR17 One single RF General GATE remote control for all: gate, garage door, venetian blind and indoor lightning. Copying code from the original remote control: Press and hold button 1 on the General GATE remote and then press button 2 four times.Release both buttons. Keep the button on the original remote pressed until the red indicator LED on the General GATE remote rapidly flashes (before the red LED flashes, the blue LED may light up for a moment). Handsender Motorline Falk RCM Mit 4 Kanalen Op 433MHz The RF remote control General GATE fully replaces the original remote control. If you are not sure, just tell us your device model (by online chat, email), we will promptly check, verify if compatible with your device. See prices and real user reviews for Motorline FALK 4-Channel Garage Door Remote Control with Rolling Code 433.92MHz FALK-B. Shop confidently on Programmierung an Empfänger oder Rangierhilfen Garagentorantrieb mit 4 Kanälen., Frequenz 433,92 MHz. Remote control works with both fixed and rolling codes. The verified compatibility is guaranteed by us. The display will flash and move to the next free position 06 as per point 5.Wait for the display to deactivate, or press both buttons ↓↑ simultaneously to exit the MENU. Place the original remote control you want to duplicate in front of or next to the General GATE remote. Produktbeschreibungen Original Motorline Falk Garagen-Fernbedienung, kompatibel mit MX4SP, MX5SP, MXS4SP Garagen-Fernbedienung, 4 Kanäle. Frequenz 433,92 MHz. Kompatibel mit Motorline MX4SP-, MX5SP- und MXS4SP-Fernbedienungen. Programmierung am Empfänger oder Rangierrahmen This remote control could be used and programmed for any brand (with both fixed and rolling code ).